Selecting Power & Cook Time; Quick Min Feature; Keep Warm Feature - Panasonic NN-SD681S Manual Del Propietário

selecting Power
example: to cook at P 6 (MediuM)
power for 1 minute 30 seconds
1.
• Press Power level
Press 5 times
2.
• Set Cooking Time to 1
3.
• Press start.
Press Power Level
once P10 (HIGH)
twice P9
3 times P8
4 times P7 (MED-HIGH)
5 times P6 (MEDIUM)
6 times P5
7 times P4
8 times P3 (MED-LOW)/DEFROST
9 times P2
10 times P1 (LOW)
notes:
1. For more than one stage cooking, repeat
steps 1 and 2 for each stage of cooking
before pressing start Button. The maxi-
mum number of stages for cooking is 3.
When operating, two beeps will sound
between each stage. Five beeps will
sound at the end of the entire sequence.
2. When selecting P10 (HIGH) power for
the first stage, you may begin at step 2.
3. When selecting P10 (HIGH) power, the
maximum programmable time is 30 min-
utes. For other power levels, the maxi-
mum time is 90 minutes.
4. For reheating, use P10 (HIGH) for liq-
uids, P7 (MED-HIGH) for most foods and
P6 (MEDIUM) for dense foods.
5. For defrosting, use P3 (MED-LOW).
do not over cooK. This oven requires
less time to cook than an older unit. Over
cooking will cause food to dry out and may
cause a fire. A microwave oven's cooking
power tells you the amount of microwave
power available for cooking.
& cook time
until the desired
power level appears
in the display window.
minute and 30 seconds
using Time Select Dial.
Cooking will start.
The time in the
display window will
count down.

Quick Min feature

This feature allows you to set or add
cooking time in 1 minute increments up to
10 minutes.
to set cooking time:
1.
2.
notes:
1. If desired, you can use other power
levels. Select desired power level
before setting cooking time.
2. After setting the time by Quick Min
Button, you can not use Time Dial.
3. Quick Min Button can be used to add
more time during manual cooking.

Keep Warm feature

This feature will keep food warm for up to
30 minutes after cooking.
example: to keep 2 cups of gravy warm for 10 minutes.
1.
2.
3.
note:
Keep Warm can be programmed as the
final stage after cook time/s have been
manually entered. It cannot be used in
combination with sensor features.
12
• Press Quick Min until
the desired cooking
time (up to 10 min-
utes) appears in the
display window.
Power Level is pre-set
at P10.
• Press start.
Cooking begins and the
time will count down. At
the end of cooking, 5
beeps sound.
• Press Keep Warm.
• Set warming time using
Time Select Dial, up to
30 minutes.
• Press start.
Keep Warm will
start. The time in
the display window
will count down.