OPERATION
ClockAnd Timer
The CLOCK and TIMER are controlled
with touch pads. They do not control
any of the oven operations.
Press CLOCK to make display
flash
The timer indicator light will stop
flashing
when the countdown
starts The colon will continue to
flash to indicate the countdown
is
active
2, Use the UP or DOWN touch
pad to set the correct time of day
The colon will flash while you are
setting the time
3, The clock will automatically
start
keeping
time within 1 minute or
you may press the clock pad for
an immediate
start
To reset the timer during countdown
use the UP or DOWN arrow pad° The
TIMER indicator
light will flash and
you can reset the TIMER. The TIMER
will count down from the new time you
select and the TIMER indicator
light
stops flashing in about 3 seconds.
The TIMER displays
hours and
minutes. The maximum
setting is
9 hours and 50 minutes on the
TIMER° Seconds will be displayed
during the countdown
of the last
minute only The TIMER will beep
when one minute remains in the
countdown.
.
2.
Press TIMER ON/OFF
"0:00"
and
the timer indicator light will flash
Select the desired time using the
UP or DOWN touch pad The
TIMER will begin to count clown
about 4 seconds
after you select
the time. If you do not wish to wait
4 seconds,
press TIMER and the
countdown
will begin immediately.
If you wish to cancel the TIMER
while it is counting
down, press
TIMER ON/OFF
The display will
return to the time of day..
The END-OF-CYCLE
tone will
sound when the TIMER countdown
is complete.
The display wilt flash
"O:00" and you will hear a series of
beeps. Press TIMER ON/OFF or
CLOCK
to stop the tone,
7