End Of Product Life; Troubleshooting; Chart Of Medical Device Symbols - Cuda surgical LED-4000 Manual De Uso

9.

END OF PRODUCT LIFE

In accordance with the European Waste from Electrical and Electronic Equipment (WEEE)
directive, we encourage our customers to recycle this product whenever possible. Disposal
of this unit must be performed in accordance with the applicable local environmental
regulations.
In the US a list of recyclers in your area can be found at: http:/www.eiae.org/.
Please contact our Repair Department to issue a return authorization to return product to
manufacturer at the end of product life.
10.

TROUBLESHOOTING

Problem
Main switch power indicator (refer to 4.1) is
not lit when switched on.
The power indicator is lit, but lamp is still off. Press Stand-by switch to turn on the LED.
11. CHART OF MEDICAL DEVICE SYMBOLS USED
®
LIT-216 CUDA
SURGICAL
(English)
Solution
Check that the AC power cord is properly
connected.
Check the unit fuses. Replace if necessary; otherwise
contact Customer Service.
Insert light guide into the active turret port.
Increase the LED intensity.
Manufacturer
Date of manufacture (YYYY-MM-DD)
"Authorized Representative" in the European
Community
Caution, consult accompanying documents
Caution: Federal law restricts this device to
sale by or on the order of a licensed
healthcare practitioner
Consult Instructions for Use
CE mark
Not for disposal in general waste
Caution: Hot Surface
Caution: Dangerous Voltage
Product Safety Mark
Do not use if package is damaged.
Rev. B
Date of Revision:07/12/18
Page 13 of 112