Leica Rudby 260SG Manual Del Usuario página 42

Rugby 260SG / 270SG / 280DG, Accessories
Automatic shut off
Low battery
Programming the
remote
To save battery power, the remote will automatically shut off after two minutes of
non-use.
The remote will display a low battery screen when the
batteries have reached a voltage where the remote can no
longer communicate with the Rugby.
To replace the batteries, remove the bottom cover of the housing. Install as indicated
on the side of the housing.

Make sure the remote is switched off prior to programming.
To program the remote to work with a specific Rugby, press
and hold the STAR button then press the POWER button.
The remote will search the immediate area for Rugby units
with remote capability, and will identify these in the display.
To select your Rugby, highlight the serial number and press the STAR button. The
remote will connect to the selected Rugby.
To exit this screen without changing settings, highlight EXIT and press the X/Y
button.
40