Please take note of the following characters:
Hint:
Hints for better installation
Attention: Ignoring this note can lead to damage of
the device or faulty operation.
Danger:
Ignoring this warning can lead to personal
injury.
2. Correct use / Safety notes
This unit is meant for panel and cabinet installation. It
complies with the safety requirements to EN 61 010 - 1/
VDE 0411 Part 1 and has left our works in perfect and
safe condition. Safe operation can only be guaranteed
if all hints and warning notes in these operating
instructions are heeded.
-
The unit is only to be operated in an installed
condition
-
Installation and connection must only be done by
skilled and qualified personnel. Please take care of
any required access protection.
-
Always connect the earth protection cable before
attempting to connect any other cables. Any
breakage of the earth conductor can make the unit
potentially dangerous.
Before installation please compare the supply
-
voltage with that on the legend plate.
-
A power isolator must be installed within easy
reach of the unit. It must also be marked as isolator.
A power fuse of ≤10 A should be installed.
-
If it is assumed that the unit cannot be safely
-
operated it must be immediately taken out of
operation and secured against unintentional use.
Repairs must only be done by trained service
-
personnel.
2 Correct use and safety notes
31