Endress+Hauser Chroma-Log Serie Manual De Utilización página 49

4 Changing consumbables (paper/pens)
Reassemble the wind up spindle by fixing the two halves together and twisting
clockwise until they lock into position.
Place the wind up spindle into the guides in the paper collection compartment
(Attention: the gear wheel must be on the left).
Tilt the paper cover back using a slight amount of pressure so that it locks into
position. Now remove the used paper core from the paper supply compartment.
Place new chart paper roll into the paper supply compartment.
Feed the paper through the tilted tear off strip and the feed axle up to the wind
up spindle. Return the paper tear off strip to its normal position
(Attention: Please make sure that the paper perforation does not tear, that the
paper grid runs parallel to the axle and that the paper start does not run behind
the wind up spool).
Close paper cover.
Position the time grid by turning the axle until the actual time lines up with the
time mark. Tear off any excess paper.
Close the paper feed guide.
Push the paper cassette into the recorder until it clicks into position.
47