Endress+Hauser Chroma-Log Serie Manual De Utilización página 40

3. Installation/Setting up
Damping fine adjustment is done using a potentiometer
(spindle trimmer/10 turn).
3.6.6 Changing the paper chart speed
The feed rate can be matched to suit your application.
It can be changed in eight steps. These steps can be
altered using a selector switch on the right side of the
recorder chassis.
Pull the chassis out of the recorder case (see 3.6.1)
You can select the required chart feed rate by using a
screwdriver (blade size approx. 2mm).
Operating elements
0 -
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 .. F - 3600 mm/h
38
OFF
10 mm/h
Paper feed rate selector switch
20 mm/h
60 mm/h
120 mm/h
300 mm/h
600 mm/h
120 mm/h