Endress+Hauser Chroma-Log Serie Manual De Utilización página 43

3 Installation/Setting up
3.7.5 Changing the chart speed
The feed rate can be matched to suit your application.
It can be changed in eight steps. These steps can be
altered using a selector switch on the recorder PCB.
Pull the chassis out of the recorder case (see 3.7.1)
You can select the required chart feed rate by using a
screwdriver (blade size approx. 2mm).
Paper feed rate selector switch
1 - 10 mm/h
2 - 20 mm/h
3 - 60 mm/h
4 - 120 mm/h
5 - 300 mm/h
6 - 600 mm/h
7 - 120 mm/h
8 - OFF
9 - OFF
0 - OFF
41