Endress+Hauser Chroma-Log Serie Manual De Utilización página 53

4 Changing consumbables (paper/pens)
4.3. Changing the print wheel.
4.3.1. Preparation
Open recorder door.
Pull chassis from the casing.
Position „dotting sequence" selector switch to the OFF position (0). The print
head moves to the left side of the unit and will no longer move until the „dotting
sequence" has been returned to normal. The paper continues to move at the
preselected paper feed rate.
Lift the scale field.
4.3.2 Changing
Lift the retaining pad.
Pull print wheel off the holder.
Push new print wheel onto the holder.
Place pin on the print wheel into the hole in the holder.
Close the retaining pad.
51