KBL megaSun 7900 alpha Manual De Instrucciones página 34

The easyCare menu item is only available with CPI
Energy and intelliSun sunbeds that are connected to
an easyCare system.
Submenu SETTINGS.
Invoked by pressing
START (ENTER).
easyCare mode only (EConly)
man. time config (T.Display)
easyCare tanning time
Adjust
Set value quicktest
Melanin min value
Melanin min runtime

> on-US
> on
> off
If this function is active, the tanning session is strict-
ly carried out on the basis of the values determined
by the easyCare system. The adjustment „on-US"
is required for operation in the United States.
Factory setting: Depending on the operator country

> on
> off
If this function is active, the tanning time can be
entered at the easyCare unit. The tanning power will
be adapted automatically.
Factory setting: off
34
M a n u a l d e i n s t r u c c i o n e s | megaSun 7900
EASYCARE
SETTINGS
> press ENTER
SUBMENU
EASYCARE SETTINGS







EASYCARE\SETTINGS
easyCare mode only (eonly)
>
EASYCARE\SETTINGS
man. time config (TDispl.)
>

> 8min .. . 20min
01/03
Allows for preselecting the tanning time. The
tanning power will be adapted automatically.
Factory setting: 20 min

> 1 .. . 7

01/07
> 150.. .300
Factory setting: 244

02/07
> 0.. .400
Factory setting: Depending on the operator country
α
lpha
EASYCARE\SETTINGS
easyCare tanning time
>
EASYCARE\SETTINGS
Adjust
>
These settings must only be made by
trained service personnel!
The default setting „1" must not be
changed.
EASYCARE\SETTINGS
Set value quicktest
>
These settings must only be made by
trained service personnel!
EASYCARE\SETTINGS
Melanin min value
>
These settings must only be made by
trained service personnel!
03/07
04/07
05/07
06/07