KBL megaSun 7900 alpha Manual De Instrucciones página 35


EASYCARE\SETTINGS
Melanin min runtime
>
> 1.. .20
These settings must only be made by
trained service personnel!
Factory setting: Depending on the operator country

EASYCARE
Sensor-Check
> 00000
Displays the current values during a melanin
measurement.
This function is intended for sensor diagnosis to be
performed by qualified service staff!

EASYCARE
Volume
>
> 0 .. . 9
Sets the volume of the easyCare voice-guidance
system.
Factory setting: 4

UV-LEVEL
SET UV-LEVEL
>
These settings must only be made by trained
service personnel!

07/07
Loads the factory (default) settings.

02/03
Submenu call
with START/ENTER.
03/03
PERSONAL PIN activate / deactivate
Enter your personal PIN.
01/01

Submenu call with START/ENTER. Displays the
current firmware typ / variant.
M a n u a l d e i n s t r u c c i o n e s | megaSun 7900
SERVICE
Load factory defaults
> Reset: press `-` for 2s
SERVICE
PERSONAL PIN
> press ENTER
SUBMENU
SERVICE\PERSONAL PIN
ENTER SOLARIUM PERSONAL PIN
> PIN:
SERVICE
FIRMWARE-TYP
> press enter
01/10
02/10
01/01
03/10
α 35
lpha