English
NOTE:
You can unplug the unit to power-off the device.
CAUTION:
The pump supplied with the mattress can only be used for mattresses
recommended by the manufacturer. Do not use it for any other purpose.
(applied part: air mattress)
NOTE:
(For models WITHOUT the low-air-loss function) During power outages, you
can cover the Quick Connector with the transport cap to maintain air pressure
inside the air cells.
NOTE:
After installation, make sure any excess cord or tubing is removed from
possible foot traffic to avoid accidental tripping. All EQUIPMENT should be
positioned to always allow unhindered patient access by physicians and
caregivers.
4.
Plug the power cord into electrical outlet.
NOTE:
1. Make sure the pump unit is suitable for the local
power voltage. Do not position the equipment
so that it is difficult to operate the disconnecting
device
2. The plug is also used to disconnect the device.
CAUTION: The pump can only be applied to the
mattress recommended by the manufacturer. Do
not use it for any other purpose. (Applied part: air
mattress)
5.
Then turn the main power switch to ON position.
9