STEINEL PROFESSIONAL HG 2620 E Manual De Instrucciones página 9

HG 2220 E
1
2
4
3
Tool features HG 2220 E
1 Stainless steel outlet nozzle
Removable guard sleeve
2
Air inlet with integrated fine dust filter
3
Soft coating for non-slip standing
4
5 Heavy-duty rubber-insulated power cord
Tool description - Operation HG 2220 E
Please note: The distance from the object you are working on depends on material and intended method
of working. Always try out the airflow and temperature on a test piece first. Using the attachable accessory
nozzles (see accessories page on the cover) the flow of hot air can be controlled with maximum precision.
Take care when changing hot nozzles! When using the hot air tool in the self-resting position, make sure it
is standing on a stable, non-slip and clean surface.
The tool is switched on and off by means of a two-stage airflow switch
ture is continuously variable at a thumbwheel in 9 steps. The guard sleeve can be removed.
Switching on causes brief voltage drops. If the mains power supply system is not absolutely stable, other
equipment may be affected. No disturbance is likely to occur with mains impedances of less than 0.43 ohms.
English
7
8
6
9
8
5
4
6 Multiple-stage switch for adjusting airflow
(2-stage)
Thumbwheel for setting temperature
7
Soft grip handle for comfortable operation
8
Replaceable mains power cord
9
6 . In settings 1 and 2, the tempera-
- 16 -
Maintenance
3
Fine dust filter
The HG 2220 E has an integrated fine dust filter
take off cover and remove filter.
a
a
Repair
Changing the power cord 14
Important! Disconnect tool from power supply.
Let have electrical repairs only be executed by fully trained licensed electricians.
If the power cord is damaged, it can easily be changed without opening the casing.
1. Undo screw and pull off cover cap
d a .
2. Release cable grip
.
b
3. Undo mains terminals
.
c
4. Pull out cable e .
5. Insert new cable and secure in reverse order (1. Firmly screw down mains terminals etc.).
English
3 . To clean it (with compressed air), undo screws (a),
- 17 -