Important Safety Instructions; Electrical Precautions - Mi-T-M CW Premium Serie Manual De Operador

WARNING: When using this product, basic precautions should always be observed, including the following:
4

IMPORTANT SAFETY INSTRUCTIONS

READ ALL THE INSTRUCTIONS BEFORE USING THE PRODUCT
RISK OF ELECTRIC SHOCK OR ELECTROCUTION:
Serious injury or death could occur if the pressure washer is not properly
grounded. Your pressure washer is powered by electricity and may
cause electric shock or electrocution if not used properly.
1. GROUNDING: See section "Installation; Power Cord Connect; Grounding
Instructions". This product must be grounded. Make sure the pressure washer
is equipped with a GFCI built into the power supply cord. If this is not available,
the pressure washer must be plugged into a receptacle that is protected by a
GFCI. Disconnect when not in use.
2. GROUND FAULT CIRCUIT INTERRUPTION PROTECTION (GFCI): See
section "Installation; Power Cord Connect; Ground Fault Circuit Interrupter
Protection". If your unit is equipped with a GFCI, DO NOT drop the GFCI as
damage could result. If the GFCI is accidentally dropped, be certain to test
the GFCI before using to ensure it is working properly. (Follow instructions on
GFCI for test procedures.)
3. Always be certain the unit is receiving proper voltage. Disconnect when not
in use.
4. DO NOT modify the plug provided with the product. If it will not fit the outlet,
have a proper outlet installed by a qualified electrician. DO NOT use any type
of adapter.
Electrical shock may occur from electrical cord.
5. This product is provided with a Ground Fault Circuit Interrupter built into the
power cord. If replacement of the plug or cord is needed, use only identical
replacement parts.
6. EXTENSION CORDS: See section "Installation; Power Cord Connect; Extension
Cords". DO NOT use extension cords with this pressure washer.
7. Keep all connections dry and off the ground. Do not touch plug with wet hands.
Do not allow electrical cords to lay in water or in such a position where water
could come in contact with them.
8. DO NOT pull on the electrical cord to disconnect from the outlet.
Electrical shock may occur if pressure washer is not operated
properly.
9. DO NOT direct spray on or into electrical installations of any kind! This includes
electrical outlets, light bulbs, fuse boxes, transformers, the unit itself, etc.
10. DO NOT allow metal components of the pressure washer to come in contact
with live electrical components.
11. Never operate the pressure washer with safety guards/covers removed or
damaged.
Serious injury or death may occur if unqualified persons attempt electrical
repairs.
12. Any electrical wiring or repairs performed on this pressure washer should be
done by Authorized Service Personnel in accordance with National and Local
electrical codes.
13. Before opening any electrical enclosure, always shut off the pressure washer,
relieve pressure and unplug the pressure washer from the power source.
Allow the pressure washer to cool down. Never assume the pressure washer
is safe to work on just because it is not operating. It could restart at any time!
Service in a clean, dry, flat area.

ELECTRICAL PRECAUTIONS:

WARNING
WARNING
WARNING
WARNING
Operator's Manual