Daikin EKHH2E200AAV3 Manual De Instalación E Usuario página 26

Press and release the key or do not carry out
any other operations for 15 seconds: the
compressor LED will switch off;
Press and release the key.
To exit the procedure before its completion:
Do not carry out any operations for 15 seconds
(any changes will be saved).
8.1.3.5 Temperature setting in the
Automatic mode (SP2)
Make sure that the keyboard is not locked
(paragraph 8.1.3.3) and that no other advanced
procedure is in progress;
Press and release the key: "SP1" will be
shown on the display;
Press either the or the
shown on the display;
Press and release the key: the compressor
LED will flash;
Press either the or the
seconds; parameters r1, r2 and r5 can also be
seen;
Press and release the key or do not carry out
any other operations for 15 seconds: the
compressor LED ( ) will switch off;
Press and release the key.
To exit the procedure before its completion:
Do not carry out any operations for 15 seconds
(any changes will be saved).
8.1.3.6 Timeslot settings for the switching
on/off of the equipment
N.B.
Before proceeding with the timeslot settings,
set day and real time as described in
paragraph 8.1.3.14.
To start the procedure:
Make sure that the keyboard is not blocked and
that no other advanced procedure is in progress;
Press and release the key: "SP1" will be
shown on the display.
To set the first timeslot:
Press and release either the
within 15 seconds to select "HOn1" (first switching
on time) and/or "HOf1" (first switching off time);
select "HOn2" and "HOF2" for the second
switching on/off time;
Press and release the key;
Page 26
Press and release either the
and within 15 seconds;
Press and release the
any other operations for 15 seconds.
To associate a time slot to a certain day of the week:
After the previous procedure has been carried out,
press either the
go within 15 seconds in order to select "Hd1"
(switch on time for day 1, or rather Monday) and/or
"Hd2...7" (switching on time for days 2-7, or rather
Tuesday-Sunday);
Press and release the
Press and release either the
within 15 seconds in order to select "1" (the first
switch on/off time) or "2" (the second switch on/off
time);
Press and release the
any other operations for 15 seconds.
key until "SP2" is
To exit the procedure before its completion:
Do not carry out any operations for 15 seconds
(any changes will be saved) or press the
key within 15
and then let it go.
8.1.3.7 Display of the operating status
Make sure that the keyboard is not locked
(paragraph 8.1.3.3) and that no other advanced
procedure is in progress;
Press and release the
Auto/ECO/Obst/Anti will be displayed for 3
seconds depending on the current active operative
status.
8.1.3.8 Silencing of the alarm sound
To silence the alarm, carry out the following procedure:
Make sure that no other advanced procedure is in
progress;
Press any key once.
or the key
or the
key or do not carry out
or the key and then let it
key;
or the
key or do not carry out
Carefully evaluate enabling of time slot operation
in order to avoid malfunctions caused by users.
key:
N.B.
The following instructions are reserved for
specialised technical assistance personnel.
Installation and user manual
key
key
key