4.4 Turn on and test installation
If the green light does not come on, then check the power connections.
If the LED is flashing green, check if the boundary wire is connected well.
Red light on: charging.
Red light flashing: error message, correct the problems.
®
If your Landroid
M is inside its territory but the display says "out of cutting area" and the LED is green, it means you
clamped the boundary wire ends incorrectly. Just reverse them.
5.
Maintenance
®
Your Landroid
M needs to be checked from time to time. The Landroid
as well as to have its parts replaced, as they can become worn. In the following we want to let you know how to take care
®
of your Landroid
M.
5.1 Battery life
®
The heart of the Landroid
M is its 28-volt lithium-ion battery. No maintenance is required. For proper storage of the battery,
make sure it is fully charged in kept in a cool dry place between (20°C-60°C).
The life-span of the Landroid
•
How long the mowing season last in your region
•
Amount of hours the Landroid
•
How to maintain your battery while in storage
®
Landroid
M can be charged manually without the boundary wire.
To manually charge the battery without connecting the boundary wire to the charging base;
1.
Connect the Charging Base to a suitable power supply.
2.
Manually dock the Landroid
3.
The charging base red light will turn on.
4.
Within 3 seconds and before the charging base light turns green, press the Landroid
®
5.
Landroid
M will begin to charge.
5.2 Winter hibernation
®
Your Landroid
M will live longer and healthier if it is allowed to hibernate. So even though it is tough, we would recommend
that you store your Landroid
Before you set your Landroid
•
Thoroughly clean your Landroid
•
Fully charge the battery.
•
Turn the power off.
J
Lawn Mowing Robot
®
M's battery depends on various factors, such as:
®
M mows per day
®
M into the Charging Base while the Landroid
®
M in your shed or garage during the winter.
®
M away for winter hibernation, you should make sure to:
®
M.
®
M works hard and after time needs a good cleaning
®
M is powered off.
®
M power ON/OFF button.
K
13
EN