Best CP34 Instrucciones De Instalación página 13

Ocultar thumbs Ver también para CP34:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

20. OPERATION
Always turn your hood on before you begin cooking to establish an air flow in the kitchen. Let the blower run for a few minutes
to clear the air after you turn off the range. This will help keep the whole kitchen cleaner and brighter.
1
2
HC0038
1) H
ALOGEN LIGHT KNOB
2) B
LOWER SPEED CONTROL KNOB
3) ON/OFF
BLOWER SWITCH
COOKTOP LIGHTING (HALOGEN)
A rotary 3-position knob (1) controls the halogen lights (OFF - low intensity - high intensity).
BLOWER
The blower is operated using two controls.
Use the on/off rocker switch (3) to start and stop the blower. When turned on, the blower operates at the previous setting of the
speed control (2).
Turn the speed control knob counterclockwise to increase blower speed – clockwise to decrease speed.
HEAT SENTRY™
This hood is equipped with a Heat Sentry™ thermostat. This thermostat is a device that will turn on or speed up the blower if it
senses excessive heat above the cooking surface.
1) If blower is OFF - it turns blower ON to HIGH speed.
2) If blower is ON at a lower speed setting – it turns the blower up to HIGH speed.
The HEAT SENTRY™ can start the blower even if the hood is turned OFF. In this case, it is impossible to
turn the blower OFF with blower switch. If you must stop the blower, do it from the main electrical panel.
When the temperature level drops to normal, the blower will return to its original setting.
3
WARNING
!
- 13 -
A
HC0039
A) H
ALOGEN LIGHT KNOB
B) B
LOWER SPEED CONTROL KNOB
B

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cp35Cp37Cp34 serieCp35 serieCp37 serie

Tabla de contenido