3. Acquiring PANO Images
3.2.1
PANO Examination Mode (Standard / Right / Left / Front /
Orthogonal)
Normal Patient Positioning
1.
Insert the Normal Bite into the Normal Chinrest and cover it with a Sanitary Vinyl
Cover.
2.
Loosen the Temple Supports OPEN/CLOSE Wheel under the control panel to
widen the Temple Supports.
3.
Guide the patient to the inside of the equipment.
4.
Use the Column UP/DOWN button or switch option to adjust the height of the
equipment so that the patient's chin reaches the Chinrest.
20
The Sanitary Vinyl Cover is for single use only. It should be replaced
for each patient. Be sure to use the approved vinyl cover.
Clean the Chinrest and the Bite with ethanol and wipe with a dry
towel before the next patient.
PaX-i Plus/ Insight User Manual