X-Ray Exposure - VATECH PaX-i PLUS Manual De Usuario

3. Acquiring PANO Images
3.3

X-ray Exposure

1. Get out of the X-ray room and close the door.
2. Press and hold down the Exposure Switch until image acquisition is completed.
36

If an emergency occurs during image acquisition, release the
Exposure Switch to cease X-ray emission.

The operator shall observe the X-ray safety regulations applicable
to his/her area at all times during the operation of this equipment.

The operator must keep vocal/visual contact with the patient at all
times during image acquisition process.

Do not operate the PC during exposure. Doing so may cause the
system to malfunction.

Let the patient close the eyes during the operation.

To acquire optimized images, instruct the patient to hold his/her
breath and not to swallow. Also don't let the patient move until the
Temple Supports are open.
The image appears on the screen.
PaX-i Plus/ Insight User Manual