BZ-TECH D-6448 Manual De Instrucciones página 211

Programming Guide S-100W - Ver. 1.0
Nixdorf Beep/LED Options
When Nixdorf Mode B is selected, this indicates the decoder should beep and turn on its LED
after a decode.
Normal Operation (Beep/LED
immediately after decode)
Beep/LED After Transmission
Beep/LED After CTS Pulse
Ignore Unknown Characters
Unknown characters are characters the host does not recognize. When Send Bar Codes with
Unknown Characters is selected, all bar code data is sent except for unknown characters, and
no error beeps sound on the decoder.
When Do Not Send Bar Codes With Unknown Characters is selected, bar code data is sent up
to the first unknown character and then an error beep will sound on the decoder.
Send Bar Code(with
unknown characters)
Do Not Send Bar Codes (with
unknown characters)
210