BZ-TECH D-6448 Manual De Instrucciones página 264

Code 11 Check Digit Verification
This feature allows the decoder to check the integrity of all Code 11 symbols to verify that the
data complies with the specified check digit algorithm. This selects the check digit mechanism
for the decoded Code 11 bar code. The options are to check for one check digit, check for two
check digits, or disable the feature.
To enable this feature, scan the bar code below corresponding to the number of check digits
encoded in the Code 11 symbols.
Disable
Two Check Digits
Transmit Code 11 Check Digits
Parameter # 2Fh
This feature selects whether or not to transmit the Code 11 check digit(s).
Transmit Code 11 Check Digit(s)
(Enable)
Note: Code 11 Check Digit Verification must be enabled for this parameter to function.
Programming Guide S-100W - Ver. 1.0
One Check Digit
Do Not Transmit Code 11 Check
Digit(s) (Disable)
263