BZ-TECH D-6448 Manual De Instrucciones página 296

Programming Guide S-100W - Ver. 1.0
Prefix/Suffix Values
A prefix and/or one or two suffixes can be appended to scan data for use in data editing. To
set a value for a prefix or suffix, scan a prefix or suffix bar code below, then scan a four-digit
number (i.e., four barcodes from Appendix D, Numeric Bar Codes) that corresponds to that
value. To correct an error or change a selection, scan Cancel barcode.
Note: To use Prefix/Suffix values, first set the Scan Data Transmission Format.
For non-SSI hosts, when using host commands to set the prefix or suffix, set the key category
parameter to 1, then set the 3-digit decimal value.
Scan Prefix
Scan Suffix 1
Scan Suffix 2
295