Program Schedule Setup - Dimplex CX-WIFI-A El Manual Del Propietario

Program Schedule Setup

Program Setup "Quick Set"
The program function guides the
user through the setup for each
of the time settings (Wake, Away,
Home and Sleep), based on the
selected zones to set the desired
temperatures.
! NOTE: It is recommended that
the main overall programming be
done first - i.e. bedrooms during
the work week and program the
entire day, then perform another
setup for another zone to speed
up the programming. After the
main programming is complete,
fine tuning can be done on a
single day, zone or event basis,
by holding down the day or event
icon for 3 seconds.
! NOTE: There is a blank setting
table at the back of this manual to
assist with ensuring that all of the
required events and zones have
been setup to the desired times
and temperatures.
CAUTION: Always press the
icons with a blunt object. Sharp
objects like pen and pencil points
may damage the touch screen.
1. Press the
the setup. The first setting will
be for the Wake Event
14
icon to start
The zone icons will begin to
flash.
! NOTE: At any time, pressing
the icon will return to the previ-
ous step. If the
3 seconds it will return to the main
operating screen.
2. Select the zone(s) that the
settings are going to be ap-
plied.
! NOTE: As each zone is se-
lected it will become solid and the
remaining zones will continue to
flash.
3. Press the
4. The day icons will begin to
flash.
5. Select the days that the set-
tings are going to be applied.
! NOTE: As each day is se-
lected it will become solid and the
remaining days will continue to
flash.
6. Press the
7. Using the
either side of the time set-
ting, set the time for the Wake
event to occur.
icon is held for
icon.
icon.
and icons on
www.dimplex.com