Dimplex CX-WIFI-A El Manual Del Propietario página 20

Operation
zone or multiple zones needs to
be adjusted for the remainder of
the current event a Temporary
Temperature Change can be
done.
1. Select the Zone to which the
temperature change will be
applied.
2. Using the
adjust the set point to the
desired temperature.
3. Select additional Zones if
needed.
! NOTE: All of the settings will
adjust to these programmed set-
tings at the next event for each of
the specified zones.
Indefinite Temperature Changes
If the temperature in a particular
zone or multiple zones needs
to be adjusted for an indefinite
period of time, an Indefinite Tem-
perature Hold can be done.
1. Select the Zone to which the
temperature hold will be ap-
plied.
2. Using the
adjust the set point to the
desired temperature.
3. Press and hold the
Icon.
4. Select additional Zones if
20
and icons,
and icons,
needed.
5. Press the
changes and revert back to
operation mode.
! NOTE: To exit the hold mode,
the user can press the
This will remove all holds that
have been applied.
Factory Reset
If the programmed settings need
to be adjusted significantly, it is
possible to Reset the controller
back to the Factory settings.
1. Press and hold the
icon for 10 seconds.
2. Follow the prompts to con-
firm the day, time, and unit of
measurement.
icon to save the
icon.
www.dimplex.com