Pulsar HELION 2 XQ Serie Manual De Instrucciones página 7

Colour palettes Selection of colour palette.
The base image mode is White Hot. To select an alternative palette:
•
Press and hold the M (9) button to enter the main menu.
•
Select the Colour Mode icon with the UP (10) / DOWN (8) buttons.
•
Enter the submenu with a short press of the M (9) button.
•
Select one of the palettes below using the UP (10) / DOWN (8) buttons.
•
Confirm your selection with a short press of the M (9) button.
Black Hot – black and white palette (white colour corresponds to low temperature, black
colour to high temperature); Red Hot; Red Monochrome; Rainbow; Ultramarine; Violet; Sepia.
Note. You can also switch from a selected colour palette to the base mode with a long press
of the UP (10) button.
Calibration
Selection of calibration mode.
There are three calibration modes: Manual, Semi-Automatic and Automatic.
Mode
To select the calibration mode:
• Press and hold the M (9) button to enter the main menu.
• Select the Calibration icon with the UP (10) / DOWN (8) buttons.
• Enter the submenu with a short press of the М (9) button.
• Select one of the calibration modes below with the UP (10) / DOWN (8) buttons.
• Confirm your selection with a short press of the M (9) button.
Automatic. In the automatic mode the need for calibration is based on the software
algorithm. Calibration starts automatically.
Semi-Automatic. In the semi-automatic mode the user determines the need for calibration
(based on the actual image status).
Manual. In the manual (silent) calibration mode the user determines the need for calibration.
The lens cover must be closed during calibration.
Wi-Fi Settings
This menu option allows you to set up your device for operation in a Wi-Fi network.
Password Setup This menu option allows you to set a password to access your thermal imager from an
external device. The password is used to connect an external device (i.e. smartphone) to your
thermal imager.
•
Enter the Wi-Fi setting submenu with a short press of the M (9) button.
•
Enter the Password setup submenu with a short press of the M (9) button. The default
password is 12345678.
• Set the desired password with the UP (10) / DOWN (8) buttons (button UP (10) to increase
the value; button DOWN (8) to reduce). Switch between digits with a short press of the M (9)
button.
• Save the password and exit the submenu with a long press of the M (9) button.
Access Level
This option allows you to configure the appropriate access level to your device made
Setup
available to the Stream Vision application.
Owner level. A Stream Vision user has full access to all device functions.
Guest level. A Stream Vision user only has access to the real time video stream from the
device.
General Settings The following settings are available:
Language
Language selection:
•
Enter the submenu Language with a short press of the M (9) button.
•
Select one of the available interface languages with a short press of the UP (10) / DOWN (8)
buttons: English, French, German, Spanish, Russian.
• Save selection and exit the submenu with a long press of the M (9) button.
THERMAL IMAGING SCOPE HELION 2 XQ
Date
Date setup:
•
Enter the submenu Date with a short press of the M (9) button. The date format is displayed
as: YYYY/MM/DD (year/month/day).
• Select the correct values for the year, month and date with a short press of the UP (10) /
DOWN (8) buttons.
•
Switch between digits with a short press of the M (9) button.
•
Save the selected date and exit the submenu with a long press of the M (9) button.
Time
Time setup:
• Enter the submenu Time with a short press of the М (9) button.
• Select the desired time format with a short press of the UP (10) / DOWN (8) buttons: 24 or
PM/AM.
•
Switch to hour setup with a short press of the M (9) button.
•
Select hour value with a short press of the UP (10) / DOWN (8) buttons.
•
Switch to minute setup with a short press of the M (9) button.
•
Select minute value with a short press of the UP (10) / DOWN (8) buttons.
•
Save the selected time and exit the submenu with a long press of the M (9) button.
Units Selection of units of measure:
•
Enter the submenu "M/Y" with a short press of the M (9) button.
of Measure
•
Select the desired units of measurement with a short press of the UP (10) / DOWN (8)
buttons: Meters or Yards.
•
Save the selection with a short press of the M (9) button.
•
Menu exit will take place automatically.
Format
This menu option allows you to format the device's memory card (erase all files from its
memory).
• Enter the Format submenu with a short press of the M (9) button.
• With a short press of the UP (10) / DOWN (8) buttons select Yes to format the memory card
or No to return to the submenu.
•
Confirm selection with a short press of the M (9) button.
•
If Yes is selected the display will show Do you want to format memory card? and Yes and
No options. Select Yes to format the memory card.
•
The message Memory card formatting means that formatting is in progress and when
completed the message Formatting completed is shown.
• If No is selected the formatting is aborted and you return to the submenu.
7