Storage Conditions - Microlife NC200 Manual De Instrucciones

Backlight:
The display light will be GREEN for 1 second,
when the unit is turned ON.
The display light will be GREEN for 5 seconds,
when a measurement is completed with a reading
less than 37.5 °C / 99.5 °F.
The display light will be RED for 5 seconds, when
a measurement is completed with a reading equal
to or higher than 37.5 °C / 99.5 °F.
Operating Body mode: 15 - 40.0 °C / 59 - 104.0 °F
conditions: Object mode: 5 - 40.0 °C / 41 - 104.0 °F
15 - 95 % relative maximum humidity
Storage -25 - +55 °C / -13 - +131 °F
conditions: 15 - 95 % relative maximum humidity
Automatic Approx. 1 minute after last measurement has been
Switch-off: taken.
Battery: 2 x 1.5 V alkaline batteries; size AAA
Battery approx. 2000 measurements
lifetime: (using new batteries)
Dimensions: 156.7 x 43 x 47 mm
Weight: 91.5 g (with batteries), 68.5 g (w/o batteries)
IP Class: IP22
Reference to ASTM E1965; IEC 60601-1; IEC 60601-1-2 (EMC);
standards:
IEC 60601-1-11
Expected
service life: 5 years or 12000 measurements
This device complies with the requirements of the Medical Device
Directive 93/42/EEC.
Technical alterations reserved.
According to the Medical Product User Act a biennial technical
inspection is recommended for professional users. Please
observe the applicable disposal regulations.
15. www.microlife.com
Detailed user information about our thermometers and blood pressure
monitors as well as services can be found at www.microlife.com.
NC 200
EN
7