DIN radio provision with pocket
1. Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs down.
(Figure A)
2. Slide the aftermarket radio into the
cage and secure. (Figure B)
3. Snap the pocket into the radio
housing. (Figure C)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
5. Reassemble dash in reverse order
of disassembly.
Kit Assembly
(Figure A)
(Figure B)
(Figure C)
99-9011
ISO radio provision with pocket
1. Mount the ISO brackets to the
radio with the screws supplied
with the radio. (Figure A)
2. Slide the radio into the radio
opening until the side clips engage.
(Figure B)
3. Snap the ISO trim plate into the
radio housing. (Figure C)
4. Snap the pocket into the radio
housing. (Figure C)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
6. Reassemble dash in reverse order
of disassembly.
6
(Figure A)
(Figure B)
(Figure C)