To Remove The Covers - Husqvarna P 520DX Manual De Usuario

To remove the covers

To remove and install the front cover of the
steering column
1. Remove the 2 screws and tilt the front cover of the
steering column forward.
2. Disconnect the wires.
3. Hold the front cover of the steering column in a
vertical position and remove it.
4. Install in opposite sequence.
To open the engine cover
1. Remove the rubber straps on both sides of the
engine cover.
32
2. Open the engine cover rearward.
Note:
To remove the engine cover fully, remove
the bolts by the hinges.
To remove the service lid
1. Turn the 2 screws ¼ turn counterclockwise to open
them.
2. Pull the service lid rearward to release it from the
hooks.
To remove the cover of the fuse box
1. Turn the 3 screws ¼ turn counterclockwise and
remove the cover.
1593 - 002 - 22.12.2020