Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
On-Screen Display Menu
Adjusts the picture to your preference
with the
following picture settings.
Example
1. Press MENU to display the menu screen.
2 Press •/T
to select "Picture" and press
ENTER or • to enter.
3 Press •IT
to select a specific adjustment item
and press •/•
to set functions or change
values.
• Additional related adjustment items may be
displayed. Press •/T
to select the desired
item, then press •liD- to set functions or
change values.
4. Press MENU to exit.
Selected item
• button
• button
for more
Brightness
for less brightness
brightness
Contrast
for less contrast
for more contrasl
for less
for more
Sharpness
Sharpness
Sharpness
The audio and video settings can be changed to
suit the program or input content being watched.
Select from the following AV modes.
Standard(Energy
star),
DYNAMIC,
MOVIE,
NATURAL, Sports and USER.
• Standard(Energy Star) is the default setting,
if you select some other options, the power
consumption may change.
• The selectable items vary depending on the
input source.
.• You can select AV MODE by pressing AV
MODE on the remote control unit. See page 23
for details of AV MODE settings.
Selected item
• button
• button
The screen
Backlight
The screen dims.
brightens.
Color
for less color
for more color
intensity
intensity
Tint
Skins tone
Skins tone
become reddish, become greenish.
Color
from cool to
Temperature
from warm to cool
warm
• Color and Tint are not available in PC mode.
• Backlight control is disabled when OPC or
Active Backlight is "On".
• Backlight control is only available when both the
OPC and Active Backlight is set to "Off".
This TV provides various advanced
functions for
optimizing the picture quality.
Automatically adjusts the brightness of the screen.
Off: The brightness is fixed at the value set in
"Backlig ht".
On: Automatically adjusts.
• When set to "On", the Optical Picture
Control (OPC) senses the surrounding light and
automatically adjusts the backlight brightness.
Make sure nothing obstructs the OPC sensor,
which could affect its ability to sense
surrounding light.
Automatically
adjusts
the brightness
of the
backlight according to the content of the incoming
signal. This option optimizes
the picture quality
and decreases power consumption.
On: Automatically adjusts the backlight.
Off: No adjustment.
when OPC or Active Backlight
is set to Off, the
power consumption
may exceed the requirements
of the Energy Star@ qualification.
Produces a clearer video image.
On-Screen Display Menu
High/Medium/Low:
Select
a desired
level for
viewing a clearer video image.
• This feature is only available in ATV, AV and
Component
mode.
Automatically adjusts the image contrast according
to the scene.
On: Automatically adjusts the image contrast.
Off: No adjustment.
Auto Adjust (for Analog PC Input Mode Only)
The Auto Adjust is only available when the input
source is PC and your TV is receiving acomputer
signal.
Select
"Auto Adjust"
for adjusting
the
settings automatically.
• Be sure to connect the PC to the TV and switch
it on before starting "Auto Adjust".
Manual Adjust
Ordinarily
you can easily adjust the picture as
necessary
to change
image
position
using
"Auto Adjust".
In some cases, however, manual
adjustment is needed to optimize the image.
H-Position:
Centers the image by moving it to
the left or right.
V-Position:
Centers the image by moving it up
or down.
Phase:
Adjust
when
characters
have low
contrast or when the image flickers.
Clock:
Adjust
when the image flickers
with
vertical stripes.
• The default cursor position may not be in the
center, because the screen position variable
ranges may be asymmetrical.
• The screen position variable ranges depend on
the View Mode or the signal type. The ranges
can be seen on the position-setting
screen.
For resetting all picture adjustment
items to the
factory preset values, press •IT
to select "Reset
Picture Settings", and then press ENTER or •
to
enter it. Press •liD- to select "OK" to confirm to
reset the settings.
This function allows the TV to automatically
shut
the power down when there is no signal received.
On: The power will automatically shut down if
there is no signal for 15 minutes.
Off: This function does not work.
You
can
adjust
the sound
quality
to your
preference with the following settings.
Example
1. Press MENU to display the menu screen.
2 Press •/T
to select "Sound" and press
ENTER or • to enter.
3 Press •IT
to select a specific adjustment item
and press •/•
to set functions or change
values.
• Additional related adjustment items may be
displayed. Press •/T
to select the desired
item, then press •liD- to set functions or
change values.
4. Press MENU to exit.
The five-band equalizer allows you to adjust the
audio frequency
settings. You can select one of
the five preset options or create a custom preset.
Equalizer:
Allows
you to choose
a specific
sound preset: Standard,
Music, Voice, Movie,
and USER.
Frequency
Range:
Displays
the different
graphic
equalizer
names set for each sound
preset
option.
Choose
a band
and make
adjustments.
When making
adjustments,
the
Equalizer option automatically changes to User.
Press
•/•to
select
the desired
frequency
(100Hz, 300Hz, 1KHz, 3KHz, 10KHz) you wish
to adjust. Use •/_'
to adjust the level. When
you have finished
adjusting
the levels, press
MENU to exit.
Q-
28
Q-
29
Publicidad
Tabla de contenido
