Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting (Tower)
WARNING: When mounting the UPS system in a tower orientation, make sure
the LCD Screen panel is at the top of the UPS, not at the bottom.
Note: To mount the UPS in an upright (tower) position, 2-9USTAND is required (sold separately).
Rotate the LCD Screen panel for easy viewing
while the UPS is tower mounted. Insert a small
screwdriver, or other tool, in the slots on either side
of the panel. Pop the panel out, rotate it and pop
the panel back in place.
Quick Installation
(Select models only) With the UPS
1
disconnected from utility power, use
a small tool to set the voltage DIP
Switches to match your input voltage
(UPS is preset to the 120V setting).
2
Plug the UPS into an outlet on a
dedicated circuit.*
NOTE: After you plug the UPS into a live AC outlet,
the UPS (in "Standby" mode) will automatically
charge its batteries,** but will not supply power to
its outlets until it is turned ON.
* Select models include an alternate plug which can be
switched by a qualified electrician.
** The BATTERY CHARGE LED will be the only LED
illuminated.
14-12-044-932757.indb 6
1
2
6
12/16/2014 5:11:03 PM
Publicidad
Tabla de contenido
