Mounting - Tripp-Lite SmartPro SMART1500CRMXL Manual Del Propietário

Mounting (Rack)
Mount your equipment in either a 2-post or 4-post rack or rack enclosure. The user must
determine the fitness of hardware and procedures before mounting. If hardware and
procedures are not suitable for your application, contact the manufacturer of your rack or
rack enclosure. The procedures described in this manual are for common rack and rack
enclosure types and may not be appropriate for all applications.
Note: The illustrations may differ from your model.
2-Post Mounting
If you want to mount a 2U or 3U model in a 2-post rack, a Tripp Lite 2-Post Rackmount
Installation Kit (model: 2POSTRMKITWM, sold separately) will be required.
2U
X 8
1
3U
X 8
1
4U
X 8
1
Important: Illustrations show the most typical installation configurations; your
model may vary. Use only the pre-drilled screw holes to attach mounting brackets
to the sides of the battery pack. When installing battery packs into the rack,
ensure that the weight of the unit is evenly distributed.
14-12-044-932757.indb 4
(Included with 4U models. Optional for 2U and 3U models.)
Amount of screws
X 8
2
may vary by model.
3U
2 X 4
4U
2 X 4
4
2U
X 4 X 4
3
X 4
3
3 X 4
X 4
12/16/2014 5:11:02 PM