Jeep Wrangler 2007-2010; Jeep Wrangler 2011-Up - Metra 95-6511 Instrucciones De Instalación

Jeep Wrangler 2007-2010

(modifications to radio cavity required)
1. Unclip and remove the lower
center trim below A/C controls.
(Figure A)
2. Remove (2) Phillips screws
exposed behind lower center
panel. (Figure A)
3. Unclip and remove the upper
center trim starting towards the
rear of the panel. (Figure A)
1 2 3 4 5 6
(Figure A)
Dash Disassembly
4. Remove (2) Phillips screws exposed
behind upper center panel.
(Figure A)
5. Unclip and remove entire panel
surrounding radio and climate
controls, including A/C vents.
6. Remove (4) 7mm screws securing
radio. Unplug and remove radio.
(Figure B)
NOTE: The top of the metal
bracket in the sub dash will
need to be cut to allow for the
clearance of the Double DIN
radio's chassis.
(Figure B)

Jeep Wrangler 2011-up

(modifications to radio cavity required)
1. Unclip and remove the power
window switches then remove (1)
9/32" screw from underneath.
(Figure A)
2. Unclip and remove the panel below
the steering column.
3. Remove (2) 9/32" screws from
the bottom edge of the radio/
instrument cluster trim panel on
either side of the steering column.
(Figure B, C)
(Figure A)
12
(Figure B)
(Figure C)