Dodge Journey 2009-2010; Dodge Caliber 2009-2012/Challenger; 2008-2014, Jeep Compas/Patriot 2009-Up - Metra 95-6511 Instrucciones De Instalación

Dodge Journey 2009-2010

(modifications to radio cavity required)
1. Unclip and remove the entire
factory radio trim panel including
the A/C controls. (Figure A)
TIP: Open the compartment door
at the top of the radio trim panel.
2. Remove (4) 7mm screws securing
radio to dash to remove. (Figure B)
NOTE: The top of the metal
bracket in the sub dash will
need to be cut to allow for the
clearance of the Double DIN
radio's chassis. (Figure C)
Continue to kit assembly
OFF
PUSH PUSH PUSH
PUSH ON PUSH AUDIO/SELECT
AM LIST
FM MUSIC
TYPE
DISC SEL;ECT
VOLUME TUNE/SCROLL
AUX
SET 1 2 3 4 5 6 AUX
(Figure A)
OUTLET
POWER
OUTLET
Dash Disassembly
SEEK SEEK SCAN U TIME INFO RW FF
PUSH ON PUSH AUDIO/SELECT
AM LIST
MUSIC
FM
TYPE
SEL;ECT
DISC
VOLUME TUNE/SCROLL
AUX
SET 1 2 3 4 5 6 AUX
POWER
OUTLET
(Figure B)
(Figure C)

Dodge Caliber 2009-2012/Challenger

2008-2014, Jeep Compass/Patriot
1. Unsnap and move shifter trim to
the side. (Figure A)
2. Unsnap center dash trim panel (do
not remove until climate controls
are removed). (Figure A)
3. Remove (4) Phillips screws holding
climate control panel to backside
of the center dash panel.
4. Remove (4) 7mm screws securing
radio. Unplug and remove radio.
5. The metal bracket in the
sub-dash will need to be removed
for the aftermarket Double DIN
radio's depth.
Continue to kit assembly
8
2009-up
(Figure A)