Kit Assembly 95-6511
Double DIN
radio provision
1. Locate the factory wiring harness in the dash. Metra recommends using the
proper mating adapter from Metra or AXXESS. Re-connect the negative battery
terminal and test the unit for proper operation.
2. Attach the double DIN brackets/trim plates to the double DIN radio using the
screws supplied with the radio. (Figure A)
3. Reassemble dash in reverse order of disassembly.
(Figure A)
Kit Assembly 99-6511
DIN radio provision
1. Slide the DIN cage into the radio
housing and secure by bending
the metal locking tabs outward.
(Figure A)
2. Slide the aftermarket radio into the
DIN cage until it snaps into place.
(Figure B)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
4. Reassemble dash in reverse order
of disassembly.
14
with pocket
(Figure A)
(Figure B)