Metra 95-6511 Instrucciones De Instalación página 9

Dodge Ram 1500 2009-2011, Dodge Ram 2500/3500 2010-2011,
Dodge Ram Chassis Cab 2011, Ram 1500/2500/3500 2012,
1. Remove (1) T25 Torx screw in
the compartment next to the cup
holders. (Figure A)
2. Remove (2) Phillips screws in the
pocket below the climate control
in the front of the center console.
(Figure B)
3. Remove (2) 9/32" screws in the
cup holders. (Figure C)
(Figure A)
Ram 2500/3500 2010-2011, Ram Chassis Cab 2011
(Figure B)
(Figure C)
Dash Disassembly
4. Push down on the collar below the
shifter then pull the shifter straight
up to remove. (Figure D)
5. Unclip and remove the top of the
center console including the cup
holders. (Figure E)
6. Unclip and remove the trim panel
from the accessory socket on the
radio trim panel, then remove (1)
T25 Torx screw. (Figure F)
Continued on next page
(Figure D)
9
(Figure E)
(Figure F)