Iso Din Radio Provision With Pocket - Metra 95-6511 Instrucciones De Instalación

Kit Assembly 99-6511
ISO DIN radio provision
with pocket
1. Mount the ISO brackets to the
radio using the screws supplied
with the radio. (Figure A)
2. Slide the radio into the radio
opening until it snaps into place.
(Figure B)
2. Snap the ISO trim plate onto
the front of the radio housing.
(Figure B)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
5. Reassemble dash in reverse order
of disassembly.
(Figure A)
Right side clip
(Figure B)
15
Notes