Table Of Care Measures; Maintenance Table - Hupfer SGR Manual Del Usuario

Section 7
Page 32
7.3.1

Table of care measures

Care and inspection measures
Top and bottom of the belt
Surface of the conveyor system
Cleaning drawer and scraper
Impurities between casters and the belt
7.3.2

Maintenance table

To ensure a long-lasting lifetime of the conveyor system, the regular maintenance is required. Appeared
faults or damages should be eliminated immediately.
Maintenance measures
Visual inspection of the conveyor system for mechanical
damages
Belt between the casters and the belt for impurities
Visual inspection of the electrical installation
Connecting cable and mains plug for mechanical damages
Protective earth conductor
Function of the main switch
Function of the Emergency Stop button
Engine box and deflection box
Function of the mechanical parts
Belt for damages and wear
Belt tension
Bearing of the drive and deflection side
Function of the limit switch
Function of the conveyor rollers
Chain tension
Chain
1
x = every 6 months
Belt Conveyor System
SGR | SPV
Care and Maintenance
Notes on Care and Maintenance Measures
Action
clean x
clean x
clean x
remove
Action
carry out
check
carry out
check
check
check
check
clean
check
check
check
check
check
check
check
Lubricate
x
x
x
1
x
1
x
1
x
x
x
x
x
x
x
x
x
x
x
x
4330053_A7