Trunk Provision - Metra 99-5716 Instrucciones De Instalación

1. Open the trunk, remove (4) pop-clips
from the driver's side trunk liner.
Remove liner. (Figure A)
2. Locate the factory tuner on the wall of
the trunk and disconnect the speaker
and antenna plugs. (Figure B)
Note: It is not necessary to remove
the tuner.
3. Plug the 70-5715 into the unit speaker
plug and the antenna extension lead
into the unit antenna plug.
4. Slide the extension harness through
the space in the back seat between the
seat back and seat bottom.
5. Unclip the rocker trim, tuck the
extension harness under the carpet
and stretch the harness to the back
of the dash.
Note: Replace the rocker trim
when completed.
6. Splice speaker leads on the extension
harness into the rear of the aftermarket
head unit.
7. Plug the factory wiring harnesses into
the switch connectors (previously
mounted in Step 2) and audio
connectors on the back of the
integrated mounting kit.
Kit Assembly 99-5716

Trunk provision

8
(Figure A)
(Figure B)