Stacked Iso Mount Unit Provision - Metra 95-7953 Instrucciones De Instalación

Stacked ISO mount units provision
1. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
2. Snap the double DIN brackets to the
inside edge of the double DIN trim plate.
(Figure A)
3. Slide the stacked ISO units into the
bracket/radio housing assembly and
secure the units to the kit using the
screws supplied with the units.
(Figure B)
4. Snap the double DIN trim plate onto the
front of the housing/radio assembly.
(Figure B)
5. Reassemble dash in reverse order
of disassembly.
Kit Assembly 95-7953
5
(Figure A)
(Figure B)