Double DIN head unit provision
1. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
2. Snap the double DIN brackets to the
inside edge of the double DIN trim plate.
(Figure A)
3. Slide the double DIN radio into the
bracket/trim plate assembly and secure
the radio to the assembly using the
screws supplied with the radio.
(Figure B)
4. Snap the double DIN trim plate onto the
front of the housing/radio assembly.
5. Reassemble dash in reverse order of
disassembly.
Kit Assembly 95-7953
4
(Figure A)
(Figure B)