Kit Assembly - Metra 99-7505 Instrucciones De Instalación

DIN radio provision with pocket
1. Remove the metal DIN sleeve from
the aftermarket radio.
2. Slide the sleeve into the radio
housing and secure by bending the
metal locking tabs down. (Figure A)
3. Slide the radio back into the sleeve
until it clicks in. (Figure B)
4. Using the hardware that came with
the radio, secure the rear support
to the back of the radio. (Figure C)
5. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
6. Snap the completed assembly into
the radio cavity until it clicks in..

Kit Assembly

(Figure A)
99-7505
(Figure B)
3
Rear View
DIN Head Unit
(Figure C)