Prelude 1988-1991 - Metra 95-7801 Instrucciones De Instalación

1. Remove (2) Phillips screws located below
the climate controls. (Figure A)
2. Remove (1) Phillips screw from each
side of the dash console and (2) Phillips
screws from each side of the floor console.
(Figure A)
3. Remove the plastic dummy cap from the
end of the dash console and (2) Phillips
screws exposed. (Figure A)
4. Pull the floor console out and gently
remove the dash console.
5. Remove (6) Phillips screws securing the
factory radio and disconnect the wiring.
6. Cut and remove all of the mounting clips
on the radio housing EXCEPT clips "A"
and "C" (the clips can be identified by the
stamped letter on the back of the housing,
near each clip). (Figure B)
Continue to kit assembly
95-7801
Dash Disassembly
Honda Prelude 1988-1991
(Figure A)
12
"A"
"C"
(Figure B)
"A"
"C"