1. Open the glove box, squeeze the retaining clips and remove the stoppers. Lower
the glove box and remove (2) Phillips screws from the left edge. Remove (2) Phillips
screws from the lower steering column panel and remove. Unclip the lower console
cover (below the ashtray and pocket) and remove. Remove (2) Phillips screws from the
base of the center console, open the console pocket and remove the (4) outer screws
exposed. Unclip the center console and remove. Remove (2) Phillips screws securing
the radio trim bezel, disconnect the wiring, and remove the trim bezel/radio assembly.
Remove (4) Phillips screws securing the radio to the bezel and remove. (Figure A)
(Figure A)
95-7801
Dash Disassembly
Honda CR-V 1997-2001
2. Cut and remove all mounting clips on the radio housing EXCEPT clips "B" and "H"
(Figure B, A).
Continue to kit assembly
"B"
"H"
"H"
(Figure B)
9
"B"