Double Din Radio Provision - Metra 99-7603 Instrucciones De Instalación

Double DIN radio provision

1. Mount the factory brackets
(removed from factory radio during
disassembly) to the sides of the
double DIN radio using screws
supplied with the double DIN radio.
(Figure A)
2. Place the double DIN trim plate on
the front of the double DIN radio.
(Figure B)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
4. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-7603
(Figure A)
(Figure B)
5
Notes