Kit Assembly - Metra 99-7424 Instrucciones De Instalación

DIN radio provision with pocket
1. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
2. Slide the DIN cage into the single
DIN radio housing and secure by
bending the metal locking tabs
outward. (Figure A)
3. Slide the aftermarket radio into
the cage until it snaps into place.
(Figure B)
4. Reassemble dash in reverse
order of disassembly.

Kit Assembly

(Figure A)
(Figure B)
99-7424
ISO mount radio provision
with pocket
1. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
2. Mount the ISO brackets to the radio
using the screws supplied with
the radio. (Figure A)
3. Slide the radio into the radio
housing until it snaps into place.
(Figure B)
4. Snap the trim plate onto the front
of the radio housing. (Figure B)
5. Reassemble dash in reverse
order of disassembly.
3
(Figure A)
(Figure B)