Before The First Use - Domo DO441BL Manual De Instrucciones

www.domo-elektro.be
outlet. To disconnect, turn controls to "OFF" or "0" position, then remove the plug
from the wall. Never pull the cord or appliance to remove the plug from the socket.
• Do not use the appliance if there is any water in it or the parts are still wet after
cleaning.
• Do not use the appliance without ingredients.
• Handle with great care when using sharp accessories like knives. Only touch the
accessories when they stopped moving inside the appliance.
• Failure to maintain this appliance in a clean condition could adversely affect the
life of the appliance and possibly result in a hazardous situation.
• Any injury or damage caused by failure to comply with these rules are at your own
risk. Neither the manufacturer, importer, or the supplier may be held liable.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
PARTS
1. Measuring cup
2. Lid
3. Jar
4. Sealing ring
5. Blade assembly
6. Motor unit
7. Speed knob
with pulse function (P)

BEFORE THE FIRST USE

1. Take the appliance out of the packaging
2. Disassemble the different parts of the
appliance and clean all removable parts
according to the instructions described in the section 'Cleaning and maintenance'.
3. Reassemble all parts when they are dry:
1. Place the jar upside down on a level surface, hold the jar by the handle and
first put the sealing ring and then the blade assembly into the base of the jar.
Tighten the blade assembly by turning it counterclockwise.
2. Turn over the jar so that the base is at the bottom again
3. Tighten the lid onto the jar by turning it clockwise until it clicks.
4. Place the measuring cup into the top of the lid and turn it clockwise until it
is tightened.
5. Tighten the jar back onto the motor unit by aligning the
arrow on the jar with the lock on the motor unit and turning
the jar clockwise.
1
2
3
4
5
6
7
33
DO441BL
7