Manual Tuning - Aiwa CSD-MD50 Manual De Instrucciones

For better reception
MANUAL TUNING
1
2
I
DISP
~ MULTI JOG
r
a
I
00.
MODE
000
000
000
000
~BAND
?~
o
II
+4, *
Press the TUNER/BAND button on the main unit
or the BAND button on the remote control
repeatedly to select the desired band.
n
If the power is turned off, the previously tuned station will be
played (Direct Play Function).
Press the 44 or - button or turn the MULTI
JOG dial to select a station.
When a station is received, "TUNE" is displayed for 2 seconds.
During FM stereo reception, [(1~)1] is displayed.
MD)))
.-
FM
Extend the FM antenna and orient it for the best reception.
AM
Keep the AM antenna away from other electrical appliances
and orient it for the best reception.
When an FM stereo broadcast contains noise
Press the MODE button.
MONO appears on the display.
Noise is reduced, although reception is monaural.
MOINO
To restore stereo reception, repeat the above again
To
change the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. If
you use this unit in an area where the frequency allocation system
is 9 kHz/step, change the tuning interval.
Press the TUNER/BAND button while pressing the DISP button.
To reset the interval, repeat this procedure.
m
When the AM tuning interval is changed, all preset stations (see
"PRESETTING STATIONS") are cleared. The preset stations
To search for a station quickly (Auto Search)
have to be set again.
Keep the +< or > button pressed until the tuner starts
searching for a station. After tuning in to a station, the search
stops.
To stop the Auto Search manually, press the +< or - button.
The Auto Search may not stop at stations with very weak
signals.
8 ENGLISH