SAVING DISPENSING PROGRAMMES
The Masterbox is programmed at three levels. The
"Enter" key (2) switches it between the different le-
vels. Each setting is adjusted with the multifunctio-
nal rotary knob (3).
Menu
1 Turn the multifunctional rotary knob (3), referred
to hereafter as the MRK) to the next free storage
location or that setting to be adjusted.
2 Press the "Enter" key (2) to reach the second le-
vel. Turn the MRK (3) to adjust the amount of
plaster in grammes.
3 Press the "Enter" key (2) to save the settings.
4 If you would like to use the default settings for
your dispensing programmes (settings in contai-
ner configuration menu position), press the Enter
key (2) again. If you would like to change the set-
tings in your dispensing programme, move the op-
tion arrow by turning the MRK (3) to „Settings"
and press the Enter key (2).
Silo config
Silo
BACK
1/2/3
Amount Water
50ml / 100g
Bowl check
OFF/ON
Program name
ABC123
Save
YES/NO
PARAMETER ENTRY
ENTER + START/STOP
LANGUAGE
ENGLISH
FRANCAIS
ITALIANO
ESPAGNOL
DEUTSCH
Standardize
Bowl weights
programs
250 ml
Silo
170g
1/2/3
500 ml
YES/NO
245g
750 ml
290g
1000 ml
505g
Save
YES/NO
5 You are now on the third level. Turn the MRK (3)
until the desired amount of water per 100g of
plaster has been set and press the "Enter" key
(2) to save the setting.
6 The bowl check can then be switched on or off.
Press the Enter key (2) to confirm.
7 The programme name can be saved in the last
field. To do so, turn the MRK (3) until the correct
letter appears. Save the letter by pressing the
"Enter" key (2) and the cursor automatically mo-
ves to the next position. Names with up to 12 let-
ters can be saved. If you do not require all 12 -
symbols, fill the remaining spaces with blanks.
Once the last symbol has been entered, the pro-
gramme is saved and you can begin dispensing.
BACK
Program
1 - 20
Amount Plaster
500g
Save
Amount Water
Bowl check
Program name
Quit
Configuration
User menu
Manual Plaster
Manual Water
21
22
Parameter
50ml/100g
OFF/ON
ABC123
GB
13