Handling And Storage; Moving The Machine - HTC 130 Manual Del Usuario

HTC 130

Handling and storage

When not in use, the machine must be stored in a dry, heated area. If it is not properly stored,
the machine may be damaged by condensation and cold.

Moving the machine

The machine can be separated into two parts for transport. To remove the handle, slacken the
knobs at the handle fixing plate. Disconnect the connector between the motor and the handle.
Store the handle and the machine so that they do not suffer damage during transport.
At least two people are needed to lift the machine, since it weighs about 60 kg.
Avoid lifting the entire weight of the machine by the handle, since the handle is not designed
for this.
The recommended method is to lift the machine by the grinding arm and the chassis at the
same time.
WARNING!
There may be sharp
edges under the
machine. Take great
care when lifting!
20