Before Use; Grinding Wheels; How The Machine Works - HTC 130 Manual Del Usuario

Before use

 Check that the power supply voltage and frequency are correct.
 Check that the correct grinding wheel has been fitted with the correct nut.
 Check that electrical cable and connectors are undamaged.

Grinding wheels

Only grinding wheels sold by HTC Sweden AB may be fitted to the machine. If this
instruction is ignored, the operator's safety may be at risk and HTC will not accept any
liability for the operation and safety of the machine. This also means that the machine cannot
be regarded as CE-marked.

How the machine works

HTC 130
The machine can be used to grind edges and places
where access is difficult, as well as casting joints.
HTC 130 has an adjustable grinding arm which can
be set at any angle, continuously variable, up to 65°,
allowing grinding in space where access is difficult.
At the maximum angle the machine may tend to tip
obliquely forward. We therefore recommend an
angle between 25° and 45°.
21